How to Fix a Stuck Pixel on Your Monitor or TV Screen in 10 Minutes

Is Your Pixel Stuck or Dead?

Before attempting to fix your screen, you need to determine if you are dealing with a stuck pixel or a dead pixel. A stuck pixel is locked onto a single color—usually bright red, green, blue, or yellow—because its sub-pixels are receiving constant electrical current. A dead pixel, on the other hand, is completely black or white because it is receiving no power. While dead pixels are often permanently damaged, stuck pixels can usually be massaged back to life with the following methods.

Method 1: Use JScreenFix (The Safest Software Solution)

This is the easiest and most effective way to fix a stuck pixel without touching your screen. It works by rapidly cycling the colors of the affected area to force the sub-pixels to reset.

• Go to jscreenfix.com on your web browser.
• Scroll down and click the blue Launch JScreenFix button.
• A black browser window will open containing a small, square box filled with flashing, static-like pixels.
• Drag this flashing box directly over your stuck pixel.
• Leave it running for at least 10 minutes. If the pixel is still stuck, leave it for up to an hour.

Method 2: Play a Stuck Pixel Utility Video

If your stuck pixel is on a smart TV or a device where you cannot easily access a web browser, you can use a video-based pixel flasher.

• Open the YouTube app on your smart TV, streaming device, or console.
• Search for "stuck pixel fixer" or "screen burn-in fix".
• Select a video that features fast-flashing primary colors (warning: do not watch the screen if you are sensitive to flashing lights).
• Let the video run on full screen for 15 to 30 minutes to stimulate the unresponsive sub-pixels.

Method 3: The Gentle Pressure Technique (The "Eraser" Trick)

If software flashing doesn't work, you can try physically stimulating the pixel. This method requires a delicate touch to avoid creating more damaged pixels.

• Turn off your monitor or TV screen.
• Find a clean, soft microfiber cloth and a blunt object with a small, rounded tip, such as a pencil eraser or a capped pen.
• Wrap the microfiber cloth around the tip of the pencil eraser to protect your screen from scratches.
• Locate the exact spot of the stuck pixel (you may need to turn the screen back on briefly to locate it, then turn it off).
• Apply very gentle pressure with the cloth-wrapped eraser directly onto the stuck pixel.
• While maintaining light pressure, turn the monitor or screen back on.
• Remove the pressure immediately. The sudden flow of liquid crystal combined with physical stimulation often pops the pixel back into alignment.

Method 4: The Warm Compress Method

If pressure alone doesn't work, applying a tiny amount of heat can encourage the liquid crystals in the display to flow correctly.

• Place a clean washcloth inside a small, sealable plastic sandwich bag.
• Run hot water over the bag (or dip the bagged cloth in hot water) until it is comfortably warm, but not boiling hot. Ensure the outside of the plastic bag remains completely dry.
• Hold the warm, dry plastic bag against the stuck pixel for 3 to 5 minutes. This warms the liquid crystal.
• Immediately follow up with the pressure technique outlined in Method 3.